The Heidra 200 hydraulic submersible pump is a self-contained, diesel powered 8" (200mm) pump available for heavy duty municipal and industrial dewatering and solids handling pumping applications. The Heidra 200 offers flow rates up to 3,100 gpm (196 l/sec.) with up to 180' (54.9 meters) of total dynamic head and solids handling capability of 3-1/8" (79mm) in diameter. The unit consists of a sturdy cast iron submersible pumpend and hydraulic power pack mounted on a rugged steel skid. A variable displacement hydraulic piston pump on the power pack delivers hydraulic fluid to a fixed displacement piston motor that drives the pumpend's shaft, bearings, and cast steel impeller. Simple engine throttle adjustments allow changes to pump flow and head performance.
Submersible Pump: Hydraulic Motor: Fixed Piston Drive Pressure: Up to 4000 psi (276 BAR) Hydraulic Flow: Up to 57 gpm (3.6 l/sec.) Hydraulic Line Length: 100 feet / 30.5M (longer runs with larger hose) Solids Handling: Up to 3-1/8" (79mm) diameter Pump Speed: Up to 2200 rpm Impeller Diameter: 11-3/8" (290mm) Discharge Flange: 8" (200mm) ASA 150 Hydraulic Connections: 1-1/4" (32mm) Quick Disconnect Strainer: Nylon coated with 2-3/4" (70mm) apertures Power Pack: John Deere 6068T Engine Horsepower: 147 hp (110 kw) @ 2200 rpm Caterpillar 3116TA Engine Horsepower: 143 hp (107 kw) @ 2200 rpm Fuel Tank Capacity: 175 gallons (662 liters) Output Hydraulic Flow: 57 gpm (3.7 l/sec.) Pressure: 4000 psi (276 BAR) Control: From engine speed and pressure compensated Hydraulic System: Two pipe, open circuit Reservoir: 80 gallon (303 liters) Control Valve: Pressure compensated on/off valve Connections: 1-1/4" (32mm) Quick Disconnect feed and return 1/2" (13mm) Quick Disconnect case drain Supply Line: 125 micron, pleated gauze Return Line: 20 micron